Steel House

Steel House

STEEL BUİLDİNG TECNİCAL SPECIFICATIONS

EARTHQUAKE CONDITIONS : Effective ground acceleration coefficient :Ao=0,40 (3rd degree)
SNOW LOAD VALUE : 80 Kg/m2
WIND SPEED VALUE : 80 km/Hr.
AUTER WALL THERMAL INSTULATION COEFFICIENT K: 0.45 Kcal/m²hC ( K: 0,53 W/m² K )
INNER WALL THERMAL COEFFICIENT K: 0.44 Kcal/m²hC( K: 0,51 W/m² K )
FIBERCEMENT BOARD : İntensity: ~1300 kg/m³ Non flammable (B1 DIN 4102 Part 1) Coefficient of thermal conducttivity ( λ10˚C dry)
ROCK WOOL : TS EN 13501 – 1 standard, A1 clas non flammable.
CHASSIS LOAD CAPACITY : 200 kg/m² (FOR DUPLEX)
ROOF THERMAL INST.COEFF. K: 0.39 Kcal/m²hC ( K: 0,43 W/m² K )

WALLS

STRUCTURAL CONSTURCTION : 84 mm Thickness,struts in different sections,duplex houses 104 mm.
ISOLATION : 80mm Thickness rockwool,
OUTSIDE COATING : moisture barrier,11 mm OSB board.
OUTER WALL THICKNESS : 152 mm.
INTERIOR WALLS : 12,5 mm. Gypsum board and gypsum plaster.Wet floor,12.5 mm. green gypsum boatd.İnterior walls 110 mm.

ROOF SYSTEM

Standart %20-%30 Sloping gable roof or hipped roof.

ROOF TRUSS : Truss,rafter and colon systems mild steel profiles.eaves profile with grille 20 cm.
ROOF COVERING : Steel roof covering

CEILINGS

ISOLATION : On the suspended ceiling 80 mm (14kg/m³) glass wool.
COVERING : 12,5 mm gypsum board
ENTRANCE DOOR :100×210 cm panel door.
INTERIOR DOORS : 80×210 and 90×210,White panel doors or melamine face doors.(On special request are made wood door,lacquer door and wood veneer door.)
KITCHEN CABINETS . 18mm.MFC cabinets and MDF doors.(On special request are made wood door,lacquer door and wood veneer door)Standart tops 38mm. HPL laminate postforming.Drawers and hinges soft closing system.
BATHROOMS :Laying tiles.Vitreus ware and batteries 1. Class.
WINDOWS PVC materials and 4+12+4 mm.heat glass.

STAIRS

Steel construction and wooden step.
STAIRS RAILING : Aluminium profile

FLOOR COVERING

Wet floor and baths laying tiles,other places laminate flooring.

OUTDOOR PAINTS

OUTDOOR PAINTS : Acrylic base paint
INTERIOR WALL PAINTS : Plastic paint

INTERIOR ELECTRICAL INSTALLATION

Electrical inner boxes,wiring and fixtures included.Electricity meter, grounding rod assembly, lighting fixtures supply-installation and external connections are the responsibility of the customer.

PLUMBING

Indoor plumbing installation,sinks,tubes,showers including,drain lines,supply lines and hot water heaters installation belongs to the customer.
HVAC SYSTEM : included.
ROOFİNG : İncluded.